Sandblasting hose
 |
Material: Rubber, fiber or steel wire. Application: Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball. The inner layer is wear-resistance and the outer layer is good at anti-aging and wear-resistance. The hose can assure high pressure and it will be not deformation . Ideal working temperature：-40-100℃. |
 |
|
Cord sand blast big diameter sandblast hose Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance. The burst pressure of the hose is four times or more higher than the working pressure. Wire braided sand Blast big diameter sandblast hose Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball. The inner layer is wear-resistance and the outer layer is good at anti-aging and wear-resistance. The hose can assure high pressure and it will be not deformation . The burst pressure of the hose is four times or higher than the working pressure. Wear-resistant suction big diameter sandblast hose Used to yake out and suction solid materials or grain materials such as mineral sand, bits of coal and cereal(rice, wheat, corn) ect. The inner layer of the hose is good in flexibility and wear-resistance, while the outer layer is excellently anti-aging and wear-resistance. The hose has the double properties of bearing both the positive and negative pressure can be used normally under the pressure of -80kpa(600mm mercury) at the vacuum. The burst pressure of the hose is four times or higher than the working pressure. |
 |
copyright @ 2010 Tianjin JingShengYuan Rubber and Plastic Products Co., Ltd 津ICP备17003280号-1
